Configure Fax Relay

[alberto.orden]

Hi to all,

How can i configure a mgcp gateway with the FAX RELAY in a CCM 4.2(1).

Best regards,

Alberto

[ebreniz]

By default the Cisco MGCP gateways use an NSE-based switchover for T.38. The commands to configure protocol-based T.38 on the MGCP gateway are -

no mgcp fax t38 inhibit

mgcp default-package fxr-package

mgcp package-capability fxr-package

The following URL will help you:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_fax_services_over_ip_application_guide/t38.html