cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
717
Views
0
Helpful
1
Replies

Configuring BLF on a SPA525G connected to CUCM

kbaker-mlr
Level 1
Level 1

Hi there,

I have a SPA525G connected to our CUCM and registered fine as a SIP device, I can assign speed dials to the spare line keys fine but configuring BLF is proving to be a challenge!

Basically under the phone tab of the SPA525G's web interface I have picked a spare line, disabled the extension, set the share call appearance to private and entered the following syntax into the extended function field:

fnc=blf+sd+cp;sub=215@192.168.104.2;ext=215@192.168.104.2

When this is applied the line key button is a solid orange colour, the speed dial function works fine but not the BLF feature. I believe the solid orange light denotes that the phone has failed to subscribe?

Any pointers would be much appreciated.

Thanks,

Keith

1 Reply 1

danielw
Level 1
Level 1

Hello Keith,

How did you manage to get the phone to register in the first place?