08-13-2012 09:44 AM - edited 03-16-2019 12:40 PM
Hi All,
Is there any command in the Voice Gateway to accomplish the below task.
When the Call hits in the CUBE and when matches the Incoming Dial-Peer and we see the below UUI header information in the SIP INVITE
User-to-User: 30303931323436;encoding=hex
When the call goes out thru the Outbound Dial-peer, is there a way i can convert this back to String.
Have anyone tried this via Sip Normalization. Can someone give me a clue.
Regards,
Senthil
08-13-2012 10:12 AM
That cannot be done, because standard dictates no other encoding option than 'hex'.
08-13-2012 11:43 AM
Hi Paolo,
Thanks for the information. I have referred this RFC. But is there any other way i can accomplish this.
I would be sending this info to a Contact Centre Environment(CVP Component or a Cisco Sip Proxy Server).
Regards,
Senthil
08-13-2012 12:07 PM
And what is that you want to accomplish ?
08-13-2012 01:13 PM
When the SIP Invite passes to the next hop, the value should be converted from
User-to-User: 30303931323436;encoding=hex
to
User-to-User: 091246
Regards,
Senthil
08-13-2012 02:02 PM
As answered above already:
per draft standard, that is not allowed.
You can read the standard youself:
If the "encoding" parameter is not present, "hex" MUST be assumed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide