cross platform SIP and SCCP phone CCME 10.5

[jchevalon]

Hello,

I want to run SCCP phones and SIP phones on a same ISR2901 (CCME 10.5)

Currently it works, they can call SIP to SCCP phone, SCCP phone to SIP etc ...

However, the general standard is a SCCP phone and on the CCA I cannot add SIP phones
for the monitoring. It does not propose numbers managed on SIP.

It's like SIP phones could not see the SCCP, and vice versa.
In SIP mode, I did not the possibility of monitoring the SIP on the other line.
It offers only me "Watch" or "line" (only for SIP line, as I am on SIP), and whereas in SCCP I have the monitoring function (only for monitoring SCCP).

I can not find a way to activate a system of cross platform best suited. 

have you ever had this problem? 

and how can I solve it?

I hope to be clear enough

Thanks a lot

[Vivek Batra]

Please share the ephone configuration of that respective phone (7962). Will see if there is any possibility.

- Vivek

[jchevalon]

Thank you:

ephone  26
 mac-address F84F.5777.9577
 username "ReceptionStandard"
 blf-speed-dial 1 510 label "Charriot Phil"
 blf-speed-dial 2 519 label "Lesuro Ludo"
 speed-dial 33 0860227062735 label "Repondeur"
 paging-dn 22
 type 7962 addon 1 7915-24
 button  1:32 2m31 
 button  5m8 6m26 7m20 8m3
 button  9m4 10m6 11m7 12m9
 button  13m10 14m11 15m12 16m13
 button  17m14 18m15 19m16 20m17
 button  21m19 22m21 24m24 25m25
 button  26m27 27m28
!