cucm > freepbx route pattern

[eric.lovelace]

So I have setup cucm with a sip trunk to freepbx, There are some feature codes built into freepbx that I would like to use and im not forsure how to setup the route pattern.

Right now I have the following route patterns configured in cucm:

.859[2-9]XXXXXX

.@

I am looking for a way to route *47 or *49 or any number prefixed with an *.....im ok if I need to do 9*47

any ideas?

[Chris Deren]

* is acceptable digit in CUCM RP, so what is the issue?

Sent from Cisco Technical Support iPhone App

[eric.lovelace]

I dial *4 and before I get to the 7 I get an automated message stating "your call cannot be completed as dialed"

[Chris Deren]

Do you have a matching route pattern for it?
The ones you listed would not do it.

Sent from Cisco Technical Support iPhone App

[eric.lovelace]

I don't that was my questions, What route pattern would I use.

[Chris Deren]

Whatever pattern you are trying to match, what are you dialing exactly?

Chris