CUCM MD5 hash values - missing info

[russhorvath007]

So just aquick one on CUCM upgardes.

I needs to upgrade my CUCM version from 7.0(2) to 7.0(2a) SU3 as I am about to deploy CUPS 8.0(3) and CUCM 7.0(2a) SU1 and above is required.

That said when i down the CUCM version - the release notes link take me to general upgrade web page. The lastest release notes are for 7.0(2a)
which states the following :

COPY /B  UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2  UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

The md5sum for the final file     03dcc9defcef6ba3d1196ea4820c7eae     UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

but the 7.0(2a) SU3 files are:

COPY /B

UCSInstall_UCOS_7.0.2.23900-4.sgn.iso_part2of1+UCSInstall_UCOS_7.0.2.23900-4.sgn.iso_part2of2

UCSInstall_UCOS_7.0.2.23900-4.sng.iso

I can't find the md5sum for the final file of UCSInstall_UCOS_7.0.2.23900-4.sng.iso. as there isn't any release notes for the SU3 version.

My MD5 checker tools gives :

CE1E585A3512BC26DB8D842180FA44D9     UCSInstall_UCOS_7.0.2.23900-4.sgn.iso

so anyone know if it should be a different  MD5  value  (i'd expect so) and if so how the hell do i check it?

thanks in advance for any advise

[William Bell · Accepted solution]

Your checksum is correct. You can get the information you need from the

Read Me file. The best way to get to the Read Me is to add the "part 1 of

2" image to your download cart. Then go to your cart and expand the line

item for the download file. You will see a link to the Read Me file. The

link will download/open a PDF with the info you need.

From the file:

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 Combine the two files using one of the following methods:

Linux

If you have a Unix/Linux system, the two parts can be combined with this

command:

cat UCSInstall_UCOS_7.0.2.23900-4.sgn.iso_part1of2

UCSInstall_UCOS_7.0.2.23900-4.sgn.iso_part2of2 >

UCSInstall_UCOS_7.0.2.23900-4.sgn.iso

Windows

If you have a Windows system, cut and paste the following command from this

document into the command prompt (cmd.exe) to combine the two parts:

COPY /B

UCSInstall_UCS_7.0.2.23900-4.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.23900-4.

sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.23900-4.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is

correct.

The MD5 for this download is: ce1e585a3512bc26db8d842180fa44d9

Step 4 Install the Service Update file:

UCSInstall_UCOS_7.0.2.23900-4.sgn.iso

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 9/2/10 10:36 PM, "russhorvath007"

[russhorvath007]

Spot on  - Many thanks William!

[Rob Huffman]

Great answer Bill! +5 for this nice documentation and overview

Cheers!

Rob