Hello!
We have two sites connected through a GRE-tunnel.
SiteA#sh ver
Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
!
voice service voip
allow-connections h323 to h323
h323
call start slow
dial-peer voice 2 voip
destination-pattern 2..
session target ipv4:10.10.1.2
telephony-service
video
maximum bit-rate 384
service phone videoCapability 1
ephone-dn 1 dual-line
number 101
ephone 1
video
mac-address 001E.135C.EECF
type 7960
button 1:1
SiteB#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
!
voice service voip
allow-connections h323 to h323
h323
call start slow
dial-peer voice 2 voip
destination-pattern 1..
session target ipv4:10.10.1.1
telephony-service
video
maximum bit-rate 384
service phone videoCapability 1
ephone-dn 1 dual-line
number 201
ephone 1
video
mac-address 001F.297A.A3CA
type CIPC
button 1:1
When the user of SiteB tries to establish a video call with the user of SiteA there is no remote video, while the the local video is present. When the user of SiteA tries to establish a video call with the user of SiteВ there is no remote and local video. Voice calls are established normally.Local video calls established normally.
On both site CUVA Application Version 2.2.1.7, CUVA CDP Driver 3.0.
Please, advise ways of the decision of the given problem. Thank you.
