09-16-2015 10:36 AM - edited 03-17-2019 04:19 AM
Greetings,
I am trying to find a way to monitor some of the counters returned by the show dial-peer voice command on our VoIP gateways. Specifically, I've been trying to find SNMP objects for the following counters:
Successful Calls = 535957, Failed Calls = 48671, Incomplete Calls = 1350
Accepted Calls = 0, Refused Calls = 0,
The dial peers are a mixture of pots and voip. We incur failed and incomplete calls, and I want to find a way to get the data and graph it.
I've not had any luck finding any relevant MIBs or other documentation. Has anyone done this, or monitored these stats in a different way?
Thanks,
Rick
05-18-2023 10:22 AM - edited 05-18-2023 10:23 AM
Hi,
I found a lot of information but nothing like that!
Because, "show dial-peer voice summary" command, shows admin and op status, but It's everything alright with or without connectivity therefore It's not useful
I hope somebody else can help us!
https://www.circitor.fr/Mibs/Html/C/CISCO-VOICE-DIAL-CONTROL-MIB.php
05-18-2023 10:57 AM
I got it!
Try with this table! 1.3.6.1.2.1.10.21.1.2.2
And then, you must use "show snmp mib ifmib ifindex" command for find your interface!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide