Dial plan recommendation

[anchichov]

Hello,

I have:

1.  A single CUCM 8.6 cluster

2. Several offices in North America

3. Two PRI gateways (MGCP) locating in different cities

For providing redundancy between gateways I want to implement globalization/localization. 

My concern is about :

1. If city has several area codes 

2. And the same area code could be used as the 10 digits (local) for one region of the city and as 11 digit (long distance) for another region.  

Will globalization/localization a good solution in this case?

Thank you,

Andrei

[Leo Salcie Tejeda]

Hi Anchichov,

I recommend you to read this: Cisco Collaboration System 10.x Solution Reference

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10.pdf

Regards

[Wilson Samuel]

Hi Andrei,

Yes, Globalization and Localization is the best bet. More over if you are in NANP Sites, then it makes it very very simpler (compared to other countries where NANP is not used).

Regards