About Leo Salcie Tejeda

Leo Salcie Tejeda · 12-12-2019

Hi everyone,I need to upgrade an UCCX version 9.02 (1) to 12.X (I know is old), unfortunately is required to upgrade first to 9.02(2) or (3) and then move to 12.X, but unfortunately version 9.02(2) or (3) are not available at Cisco anymore. Does some...

Leo Salcie Tejeda · 06-20-2017

Hi everyone, I'm Running CUCM 11.5 Syncing users with 3 LDAP domain, example 'Domain A', 'Domain B' and 'Domain C' + Authenticating only with 'Domain A'. There is a trusted forest between them. Now need to authenticate with all 3 Domain. My question ...

Leo Salcie Tejeda · 02-12-2017

Hi, Here the scenario: Phone A (with SLRG A) is calling Phone B (with SLRG B) which has SNR activated. When call is forwarded to Phone B's Remote Destination, call exit throught SLRG A or SLRG B? I couldn't find any information explain it. Thanks i...

Leo Salcie Tejeda · 12-08-2016

Hi everyone, I was reading about HSRP for CUBE and saw a new command I have never used: mode border element.What really do? After read some documentation still don't understand what additional service are activated. Thanks in advance Regards

Leo Salcie Tejeda · 08-23-2016

Hi everyone, I'm trying to setup Extension Mobility Cross Cluster between two CUCM Cluster v9.1.2. Certificate have been consolidated end uploaded to both cluster, everything look OK but I'm getting a error on SiteB when I tried to Update EMCC Remot...

Leo Salcie Tejeda · 01-04-2019

Hi Huddles,What you need is called SNR (Single number reach aka Mobility). Both extension will ring at the same time.Another alternative is to register both phone on the same CUCM with same extension number. Check this: https://www.cisco.com/c/en/us/...

Leo Salcie Tejeda · 01-04-2019

Hi Ezisaac,We need more information than that to help you.Please PM me.Regards

Leo Salcie Tejeda · 01-04-2019

Hi, Reboot/crash is not an expected behavior for a phone, maybe you're hitting a bug. Although, you need to use the same video format on both endpoint, unless you have a Cisco Telepresence Service (MCU, Meeting or Conductor).Cisco 8945's video suppor...

Leo Salcie Tejeda · 01-04-2019

Just in case, follow these steps for connecting both Expansion Modules:1) Plug one end of the second interface cable into the AUX jack with the “out” icon underneath on the first Expansion Module (the one closest to the phone). 2. Plug the other end ...

Leo Salcie Tejeda · 01-03-2019

Have you tried connecting only the one is resetting? Does it work?

Member Since	‎06-28-2011 08:22 AM
Date Last Visited	‎12-18-2019 12:07 AM
Posts	1,094
Total Helpful Votes Received	668

User Statistics

User Activity

Needing UCCX 9.0(2) SU2 or SU3 ISO

LDAP Authentication Multiforest without ADAM

SNR running standard local route group

CUBE: mode border element what really do?

EMCC Error: "Remote cluster update failed: Lost communication to default and backup server."

Re: Ring Two Different Extension at the same time

Re: Can I use ISR 4331 or 4431 to support a small-size hotel with 50 rooms and 100 guest phones (with Voice mail)?

Re: ip phone 8945 crash/reboot from h264 video stream

Re: phone 7975 with 2 expansion module 7916

Re: phone 7975 with 2 expansion module 7916