dspfarm redundancy

[chialun]

dear sir,

We've cisco 3725 1 mgcp which have installed voice-card in to be act as dspfarm for resources.

Request: We've purchased new cisco 3825 with below specifications: -

Cisco3825-v/k9 - 3825 voice bundle , pvdm2-64,sp serv,64f/256d

vwic-2mft-t1/e1

pvdm2-64

cab-acu

s382spsk9-12403

please advise how to make it redundancy for dspfarm?

thanks.

[gogasca]

Hi

_Hope u are fine, u want redundancy for which feature?

CFB or XCODER?

If u want redundancy in CFB u can create a CFB in CCM and use MRG and MRGL.

If u want redundancy in XCODER u need a different router that act as XCODER or create different profiles...and register them in CCM...

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edad7.html

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/b04mrgrp.htm#wp1030758

[chialun]

hi gogasca & all,

i'm fine, thank you for your sharing.

I want redundancy for transcoder,dspfarm & cfb.

attached is the working configuration for existing environment.

We hope to add additional cisco 3825 with new nm & pvdm to create new resources. please advise the command should apply for the new cisco 3825 and at ccm .

We have ccm version 4.1(3)

thank you very much.