E1 Channel Utilisation stats - Cisco 3945 Gateway

[matthewciscokid1]

We are trying to monitor the E1 channel utilisation on 3 Voice Gateways - CISCO3945-V/K9. Each Gateway has approximately 6 E1 connections.

We are using the MIB CISCO-POP-MGMT-MIB detailed on this Cisco web page http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801abe59.shtml

We are using SolarWinds as the SNMP Manager and are successfully retrieving Data of active DS0 channels however not an a per interface (E1) basis but of the entire Gateway (all 6 E1’s).

We would like assistance please in understanding how we can monitor all interfaces individually.

Any advice would be greatly appreciated.

[Tagir Temirgaliyev]

use mrtg

[matthewciscokid1]

Thank you for the response however I believe from reading their website that it only displays data throughput. I require the ability to display the amount of active channels DS0 in use of an ISDN e1.

[Tagir Temirgaliyev]

mrtg can show active channels DS0

try google search