ephone changes

[rkarrmfibc]

I need to make changes to a few ephones such as username and number, but the GUI will not allow this.

Is there a way through command line interface?

[paolo bevilacqua]

Of course. CLI is what you use for professional configuration, the GUI is mainly for users to set CFA from home and things like that.

[rkarrmfibc]

I figured out how to change the username for each ephone, but cannot remember how to change the User Number associated with it.

IE. Currently at 226. I want it to be 4279.

[paolo bevilacqua]

1. find on which DN tag the number is:

show ephone telephone 226

2. change number under said tag:

conf t

ephone-dn XX

number 4279

[rkarrmfibc]

Thanks.

I was using just ephone, not ephone-dn command.

Appreciate the help.

PS. I tried to find the Command Line Interface guide for v12.4 (UC520), and cannot locate it.

If you have a link, that would be great.

thanks again.

[paolo bevilacqua · Accepted solution]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

Please remember to rate useful posts with the scrollbox below.