It all started out with not be able to receive faxes, but I can not even "call" the FXS ports. I have connected (for troubleshooting) a regular analog phone which (same as the fax) can call out, but it does this with a anonymous number.
If I call the extension from another Cisco IP Phone I receive voicemail or when this is not configured busy tone. I can call other Cisco IP phone extensions, but it does this (again) with a anonymous number
Almost default config from Cisco still does not work, (below)
!
ephone-dn 5
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
call-forward busy 333
call-forward noan 333 timeout 10
!
!
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
call-forward busy 333
call-forward noan 333 timeout 10
!
!
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
call-forward busy 333
call-forward noan 333 timeout 10
!
!
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
call-forward busy 333
call-forward noan 333 timeout 10
!
!
ephone 1
device-security-mode none
video
mac-address ****.8EB0.0000
username "PhoneA"
type anl
button 1:5
!
!
!
ephone 2
device-security-mode none
video
mac-address ****.8EB0.0001
username "PhoneB"
type anl
button 1:6
!
!
!
ephone 3
device-security-mode none
video
mac-address ****.8EB0.0002
username "PhoneC"
type anl
button 1:7
!
!
!
ephone 4
device-security-mode none
video
mac-address ****.8EB0.0003
username "PhoneD"
type anl
button 1:8
