05-10-2010 12:02 PM - edited 03-15-2019 10:41 PM
I want to mask a Local Directory Number on my CUCM 6.0.1, how do I go about it?
Solved! Go to Solution.
05-10-2010 12:20 PM
Here's some more detail.
Call Display Restrictions
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html
Brandon
05-10-2010 12:10 PM
Calling out to the PSTN or to another internal phone?
Brandon
05-10-2010 12:12 PM
to internal phones
05-10-2010 12:17 PM
Take a look at the following doc.
https://supportforums.cisco.com/docs/DOC-3029
Hope this helps.
Brandon
05-10-2010 12:20 PM
Here's some more detail.
Call Display Restrictions
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html
Brandon
05-10-2010 12:27 PM
Thanks
i think this will do it.
05-10-2010 12:12 PM
If you mean how do you maske the CLID from an IP phone to a PSTN number, then you can do this in the following places:
1. phone line
2. route pattern
3. route list/route group
4. gateway
If you mean how do you mask numbers for internal (phone-to-phone) calls then you can use translation patterns.
Could you provide more specifics on what you are looking to accomplish?
HTH.
Regards,
Bill
Please remember to rate helpful posts.
Please remember to rate helpful responses and identify
05-10-2010 12:17 PM
I want to mask to internal (local) phones
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide