How to configure an analog port on the VG to not have to dial a 9 first

[tenmill08]

Can someone provide the proceedure on how to configure an Analog port on a Voice Gateway to not have to dial 9 first?

[Charles Hill]

Is this a call manager express or call manager? 

MGCP gateway or SCCP gateway?

[tenmill08]

Hi Cehill,

This is CUCM 8.6 Service Update 5 we are using MGCP.

Thx for any insight

[Charles Hill]

Still working on it.

Created a translation pattern to call 9.

-> Create a new partition "9accessPT

-> Create a new CSS "9accessCSS"

-> Add the 9accessPT to 9accessCSS

-> Create a translation pattern, with a blank translation translation pattern and a called party transform mask "the number you want dialed"  **********If i enter 9and a number, it automatically calls out, if i put only a 9 in the called party transform mask it does not.********

Urgent priority is checked.

-> Add the calling search space to the phone.

I'm thinking its not hitting a valid route pattern, since the 9 has already been dialed.

Still working on it.

Any ideas?

If you get it working, let me know.

[tenmill08]

Hi Cehill,

It seems like the issue is that the customer don't want to dial the 9 to get outside line ,they basically  want to beable to dial a number with out dialing 9+1 and the 10 digits, I think this would warrant a new CSS,Route Pattern,Partitions  etc.. correct?,

[Charles Hill]

Got it working!

-> Create a new partition "9accessPT

-> Create a new CSS "9accessCSS"

-> Add the 9accessPT to 9accessCSS

-> Created a new route pattern with @ and added it to the 9accessPt

-> Create a translation pattern, with a blank translation translation pattern and a called party transform mask 9

Urgent priority is checked.

-> Add the calling search space to the phone.

If anyone sees a problem with this config, please chime in, but all is testing ok.

I was attempting to use the existing route patterns by automatically dialing 9, but it wasn't working without the new @ route pattern.

[Charles Hill]

-> Create a new Partition

-> Create a new CSS

-> Add the the new partition to the new CSS

-> Create a new route pattern @ and assign it to the new partition

-> Add the new CSS to the analog phone.

 Hope this helps.