How to monitor network bandwidth on CUCM server?

[raziel78kain]

Hello,

a quick question: is there a way to monitor the network bandwidth on a CUCM server?

We have tried to use the CLI command "show network eth0 detail", but it gives us the total RX and TX bytes, and not the real-time network usage (es.: in Mbit/s) in RX and TX...

Furthermore, does the CUCM have historical or real-time data regarding this network usage that can be viewed/downloaded by the RTMT?

TIA and regards.

[Manish Gogna]

Hi,

Please check the following post for some useful hints related to similar query

http://www.gossamer-threads.com/lists/cisco/voip/194117

Manish

[raziel78kain]

Hello Manish,

thanks, but we need something to check the total traffic transmitted by/received to every second by/to the server, and not the CUCM Location bandwith usage...

Do you have other suggestions?

Thanks and regards.

[Manish Gogna]

Hi,

I am not aware of any tool giving such an exact report on cucm. You might require checking for any third party tools.

Manish