Hi,
Is there a service parameter to prevent call routing loop between CUCM6 and pbx.
There are CUCM6 and PBX in my company.
CUCM6--GW--E1--PBX
DNs of IP and analog Phone are in the range of [1-8]xxx.We have config a route patter [1-8]xxx pointed to PBX.When users of IP phone dial a DN which isn't a DN of IP Phone,CUCM will sent this call to PBX.When users of IP phone dial a DN which isn't a DN of analog Phone,PBX will sent this call to CUCM.
So when user dial a unsigned number,call routing loop occur.
I know we can config a proper Inbound CSS of GW to prevent the loop.However,Is there maybe a service parameter like "forward maximum hop hount" to prevent call routing loop between CUCM6 and pbx?
Best regards
Mark
