04-19-2010 01:17 PM - edited 03-15-2019 10:20 PM
We have all 796x serier SCCP phones registered with CUCM 6.1.4. From time to time we need to reboot a phone in order to add an extension to the phone. How can I tell if the phone is in use?
On a gateway router I can do "sh voice call active summary" to get an off/on hook status. There must be some way to do that with CUCM.
Simply calling the phone doesn't verify anything since the person could be in a conference and simply not answering the call.
Solved! Go to Solution.
04-19-2010 01:22 PM
Hi
Just add it.
If it's in use, nothing will happen until the person hangs up the phone, then the change will apply.
Regards
Aaron
Please rate helpful posts...
04-19-2010 01:22 PM
Hi
Just add it.
If it's in use, nothing will happen until the person hangs up the phone, then the change will apply.
Regards
Aaron
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide