My config int Switch C3560.
no aaa new-model
ip subnet-zero
ip routing
interface FastEthernet0/2
switchport access vlan 10
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport trunk allowed vlan 10,11
switchport mode trunk
spanning-tree portfast
!
interface FastEthernet0/3
switchport access vlan 10
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport trunk allowed vlan 10,11
switchport mode trunk
spanning-tree portfast
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
description VLAN-DATA
ip address 155.14.231.2 255.255.255.0
!
interface Vlan11
description VLAN-VOICE
ip address 172.14.33.2 255.255.255.0
!
ip default-gateway 172.14.33.2
ip classless
no ip route static inter-vrf
ip http server
!
then now ip phone its works can be use
and computer can be use lan access
and my problem is my computer its connect with ipphone can not access in vlan 2 (it test with ping from pc to ipphone) because i must use server its in vlan 2
please advice for me.
I don't work with VoIP or IP Phone.
