Integrating CUCM BE 6000 with Huawei IP PBX eSpace U1910.

[mshameemnk]

We have in ip voip network by using huawei PBX. and we need more features. so we are planning to integrate it with BE 6000.

Can we integrate CUCM BE 6000 with Huawei IP PBX eSpace U1910.? If so how can we do that..?

[mshameemnk]

Yes, We can do it. We can connect CUCM with Huawei PBX by using SIP TRUNK

[brightlawrence]

can you please share documentation on how to implement huawei IP phones to cisco  CUCM ...

[Nashaatmusa]

What you are looking for exactly ?

A) Integration CUCM with huawei PBX

b) Remove huawei PBX and let the (huawei IP phones) register directly to CUCM

[brightlawrence]

i will prefer the point 2, i.e which is below 

Remove huawei PBX and let the (huawei IP phones) register directly to CUCM

[Nashaatmusa]

Here you go 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_BK_C733E983_00_cucm-system-configuration-guide/Configure___Third_Party_SIP_Phones.pdf

hope this is helpful 

[brightlawrence]

i have implemented this part, however the IP phone has a default username and password which i have no idea of... my thinking is there should be a gui for the huawei IP phone where i can go and login to the device and configure it with the CUCM parameter...

[Nashaatmusa]

On this case i think you have to check the documentation per phone model on how to enter these kind of details into the phone..

[Ratheesh Kumar]

Hi there

Please check this and see that helps

http://forum.huawei.com/enterprise/en/thread-208735-1-1.html

Hope this helps!

Cheers
Rath!

***Please rate helpful posts***