11-30-2008 09:15 PM - edited 03-15-2019 02:49 PM
Hi All,
I have two clusters A & B with different Call Manager Versions.I want the calls should be established between two clusters.
what all is required to be done i.e. min. basic config in call managers /any hardware is required ?
regds,
aman
Solved! Go to Solution.
11-30-2008 09:57 PM
configure an ict on each cluster and point to the ip, configure the inbound css on ict. Versions do not matter. Then use the ict on route patterns
Java
11-30-2008 09:31 PM
I assume that you dont have a GK in this scenario. Create a intercluster trunk on Cluster A (No GK Controllerd) and a Router Pattern pattern pointing phones in cluster B. follow the same for Cluster B.
11-30-2008 09:44 PM
Hi Asif,
That's right we do not have any Gatekeeper.
Further,if you could detail us the exact config to be done in CCM ,it would be great.What I undertsand is that CM version is not any limitaion on ICT?
regds,
aman
11-30-2008 09:57 PM
configure an ict on each cluster and point to the ip, configure the inbound css on ict. Versions do not matter. Then use the ict on route patterns
Java
12-01-2008 09:08 PM
thanks...
12-01-2008 09:49 PM
Hi Aman,
Also ensure that IP reachability is there. Ping and check......
Regards,
Ashish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide