Intergration of tandberg device with CME

[owaisqadri]

Hi,

can anyone explain me how Tandberg device will be intergrated with CME 8.0 . how the connection will be done. so that i can call any ext number  from tandberg device  & vice versa.

[yuanwu]

Please follow the steps if the Tandberg is a SIP device,

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f33eb.shtml

There is no device id for Tandberg currently, pls use type 7961.

Rgds/Randy

[DmytroSoloviov]

Yuan, tell us, please, if video calls between Tandberg SIP-terminals would be supported on CME.

Thanks a lot!

[yuanwu]

for Tandberg sip lineside video support, depends on the specific model, we need inter-op testing, if it behavior like standard SIP trunk to CME, it might work. you need to test it.

Rgds/Randy

[owaisqadri]

i have tandberg device model edge 95 mpx need to intergrate with cme 8.0 is there any step by step guide how to register the tandberg device with cme.