09-28-2009 03:56 AM - edited 03-18-2019 10:37 AM
It says you can create a software MTP on The voice gateway. I have looked everywhere for the required config on the 2800 Gateway, but no joy.
I have seen plenty of examples to configure the MTP on callmanager.
I am wondering what commands are needed on the Gateway itself.
any ideas
Solved! Go to Solution.
09-28-2009 04:28 AM
Configuring a DSP Farm Profile
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1030623
Look at step 9
HTH
java
if this helps, please rate
09-28-2009 04:28 AM
Configuring a DSP Farm Profile
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1030623
Look at step 9
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide