Local Directory Issue with CME

[jrblanquez]

Hi everyone.

I have phones via SIP and via SCCP registered with a CME. However, in some phones local directory works correctly but not in others, although it is the same configuration. Any ideas?

This is the configuration:

voice register global
mode cme
source-address x.x.x.x port 5060
max-dn 200
max-pool 42
load 7960-7940 SCCP45.9-2-1S.loads
load 7945 SCCP45.9-2-1S.loads
load 7970 SIP70.9-2-1S.loads
load 9971 sip9971.9-2-2SR1-9.loads
load 8865 sip8845_65.10-3-2-16.loads
load 8845 sip8845_65.10-3-2-16.loads
load 8821 sip8821.11-0-5SR1-4.loads
authenticate register
authenticate realm xxx
url directory http://x.x.x.x/localdirectory
tftp-path flash:
file text
create profile sync 0081350434064982
ntp-server x.x.x.x mode directedbroadcast
camera
video

Regards.

[Rajan]

These phones were registered in any CUCM before ? Its worth to try deleting ITL files if any in the phones in which the local directory is not working.

HTH
Rajan
Please rate all useful posts by clicking the star below and mark solutions as accepted wherever applicable

[jrblanquez]

Hi @Rajan 

No, never had been  registered with CUCM just with CME.

I already test with this and was unsuccesfull.

Thanks.