cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1037
Views
5
Helpful
2
Replies

Logging and voice gateways

shikamarunara
Level 4
Level 4

I'm trying to find more detail on a voice gateway's unregistration/registration that shows up in RTMT.  I've not done much in terms of logging, so this is new to me.  Can someone recommend a setting that will allow me to view an MGCP gateway's loss of registration - time and cause?  I'd like to be able to collect information for a 24 hour period if possible.

1 Accepted Solution

Accepted Solutions

Payal Bhaduri
Cisco Employee
Cisco Employee

The call manager traces will give the time and cause of registration.

The document below will assist you with the trace collection.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

You can also collect the debugs from the router using the following procedure:

Conf t

logging buffered

no logging console

debug mgcp packets

debug isdn q931

debug isdn q921

This will enable the logging buffer to run on your router.

When the problem occurs again can u do a

Conf t

No logging buffered

U all

Term length 0

Do sh log

View solution in original post

2 Replies 2

Payal Bhaduri
Cisco Employee
Cisco Employee

The call manager traces will give the time and cause of registration.

The document below will assist you with the trace collection.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

You can also collect the debugs from the router using the following procedure:

Conf t

logging buffered

no logging console

debug mgcp packets

debug isdn q931

debug isdn q921

This will enable the logging buffer to run on your router.

When the problem occurs again can u do a

Conf t

No logging buffered

U all

Term length 0

Do sh log

Thank you, Payal.