08-03-2009 02:06 AM - edited 03-15-2019 07:11 PM
Hi,
Is it possible to configure router with dsp as MOH to work with Callmanager 6.0 Enterprise?
08-03-2009 02:43 AM
Hello,
it's a recommended way for MOH streaming at remote sites:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/moh.html#wp1043896
As far as I understand it, DSPs are not involved in process of streaming.
Hope this helps.
08-03-2009 03:20 AM
Is is possible under SRST licence only??
08-03-2009 03:32 AM
yes, as the mentioned document states:
"An SRST license is required regardless of whether the SRST functionality will actually be used. The license is required because the configuration for streaming MoH from branch router flash is done under the SRST configuration mode and, even if SRST functionality will not be used, at least one max-ephones and one max-dn must be configured."
08-03-2009 07:29 AM
If MoH is from file, not DSP are necessary.
Live MoH requires an E&M port, and DSP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide