MWI indicator voice messages not working

[nataliabello]

Hello

I  have trouble configuring the CME / CUE because the LED display, voice  mail does not work properly when the user receives messages (the lamp  does not light)

Here I leave the sh run of the CME / CUE.

Thank you for your help.

[Rob Huffman]

Hi Nati,

Can you please try adding the (3 dots ...which should equal the extension length in your dial plan) 

ephone-dn  198
number 303...
mwi on
!
!
ephone-dn  199
number 304...
mwi off

The number of dots (...) should be equal to the extension length being used

Have a look at this excellent Troubleshooting doc;

Troubleshooting Unity Express Message Waiting Indication (MWI) Problems

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008027fa9f.shtml

Hope this helps!

Rob

[nataliabello]

Escribe texto o la dirección de un sitio web o traduce un documento.

Cancelar

Escuchar

Hi Rob,

You were right, recheck the document and found the solution to my fault and I was here:

.-Make sure that mwi sip outcall is configured under the ccnsubsystem sip command.

Saludos,

Nati.

El mensaje fue editado por: nataliabello