cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4631
Views
5
Helpful
3
Replies

New ISM-SRE in service-module fail open mode

Scott Hanson
Level 3
Level 3

                   Hello,

I am trying to bring up a new ISM but it is in service-module fail open mode.  Below is the relevant configuration.  Anyone have any ideas on what might be wrong?

interface GigabitEthernet0/0.5

description Voice VLAN

encapsulation dot1Q 5

ip address 10.0.0.1 255.255.255.0

ip helper-address 10.1.1.5

h323-gateway voip interface

h323-gateway voip bind srcaddr 10.0.0.1

service-policy input Voice

!

interface ISM0/0

ip unnumbered GigabitEthernet0/0.5

service-module fail-open

service-module ip address 10.0.0.5 255.255.255.0

service-module ip default-gateway 10.0.0.1

and for my route statement I have

ip route 10.0.0.5 255.255.255.255 ISM0/0

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

New modules come empty. You have to install software on it.

View solution in original post

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

New modules come empty. You have to install software on it.

Well dang! Thanks Paolo!

Thank you for the nice rating and good luck!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: