i am facing an issue with ntp. first my publisher got unsynchronized with ntp. pub got sync but sub1 and sub2 and tftp all three servers did not got sync for around 10 hours.
cucm version 8.6. i got mails from rtmt for the same.
At Thu Oct 17 21:33:50 IST 2013 on node 10.105.11.17, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Critical
MatchedEvent : Oct 17 21:33:42 PUN-HJW-CTFTP1 user 2 ntpRunningStatus.sh: Primary node NTP server, PUN-HJW-CPUB1, is currently inaccessible or down. Verify the network between the primary and secondary nodes. Check the status of NTP on both the primary and secondary nodes via CLI 'utils ntp status'. If the network is fine, try restarting NTP using CLI 'utils ntp restart'.
AppID : Cisco Syslog Agent
NodeID : PUN-HJW-CTFTP1
TimeStamp : Thu Oct 17 21:33:42 IST 2013
i received this mail around 1700 times. not thw time is synchronized on all the servers.
please let me know how to tshoot i mean how should i collect traces so that i can find the root cause.
i collected some logs from RTMT but i am unable to trace the cause. please find the logs in attachement.
Join this featured IT Admin Control Hub session where you’ll hear about the improved Meeting diagnostics capability in Control Hub which provides IT Admins richer insights about their meetings, the participants and the quality of service. See metrics to h...
This document explains how to register a Cisco TelePresence or WebEx device to Cisco WebEx Cloud Service Using API or Local Web Interface use. This procedure is applicable for Collaboration Endpoint Software 9.8 and later. In previous versi...
SymptomsCER or other Cisco UC platform servers fail to boot with an error message immediately on startup similar to:FATAL: Could not load /lib/modules/2.6.32-642.el6.x86_64/modules.depDiagnosisYou do some searching, and think it's related to this bug - CS...
This Log Analysis tool helps you analyze the call processing and the signaling information collected by the XSLog logs from the Cisco BroadWorks system. This tool also supports a broad range of other Cisco products and technologies...
We are excited to announce we have enhanced our Webex Online Courses Program to offer a variety of courses to help customers increase their knowledge and skill-set on the features and functionalities of their Webex product.
Free – all courses