02-04-2009 01:23 AM - edited 03-15-2019 03:58 PM
Good day!
Dont listen remote subscriber when call him to phone, connected to fxs
Fxs registered on ccm6,0 use sccp, status - registered.
show any listings^
zzzzzz#sh sccp
SCCP Admin State: UP
Gateway Local Interface: FastEthernet0/1
IPv4 Address: 192.168.11.34
Port Number: 2000
IP Precedence: 1
User Masked Codec list: None
Call Manager: 192.168.110.100, Port Number: 2000
Priority: N/A, Version: 6.0, Identifier: 1
Trustpoint: N/A
Alg_Phone Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.110.100, Port Number: 2000
TCP Link Status: CONNECTED, Device Name: AN215532AEA3000
Reported Max Streams: 1, Reported Max OOS Streams: 0
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: g711ulaw, Maximum Packetization Period: 20
Supported Codec: g711alaw, Maximum Packetization Period: 20
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: g729ar8, Maximum Packetization Period: 220
Supported Codec: g729br8, Maximum Packetization Period: 220
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: ilbc, Maximum Packetization Period: 120
Alg_Phone Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.110.100, Port Number: 2000
TCP Link Status: CONNECTED, Device Name: AN215532AEA3001
Reported Max Streams: 1, Reported Max OOS Streams: 0
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: g711ulaw, Maximum Packetization Period: 20
Supported Codec: g711alaw, Maximum Packetization Period: 20
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: g729ar8, Maximum Packetization Period: 220
Supported Codec: g729br8, Maximum Packetization Period: 220
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: ilbc, Maximum Packetization Period: 120
what is your meaning about this problem??
02-04-2009 03:25 AM
What's in there between GW and CM ?
02-04-2009 03:43 AM
any routers in mpls network..
trouble was shoot by use this command:
sccp codec g711ulaw mask
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide