yes, the same can be done with translation-rules applied on the inbound dial-peers.
how do you send that number 3476 to CUBE? is it not the internal extension?
refer the below link for better understanding of translation rules and translation profiles.
Please rate all the helpful posts.
I guess, I am not understanding this clearly. I read the link provided and still not clear.
This number 3476 is not an extension, nor a DID and is not used in the office. It is just a number manager has chosen. Basically, when someone dials this number 3476 in the office, manager wants this number to call 1 (714) 781-7277 which is an outbound call to Disneyland. Office has a SIP trunk with ITSP. Can this be accomplished on the 2911 cube router and how ?
I'd still say configuring the translation pattern in CUCM for this change is a better and easy way.
if you still want to do it on the CUBE, please try the configuration below. (I presume the number 3476 will reach from CUCM to CUBE directly without any modification)
>> Create the translation rule to change the number
voice translation-rule 1
rule 1 /3476/ /17147817277/
>> create the translation profile and apply the rule to change the called numbers
voice translation-profile Change3476
translate called 1
>> Apply this translation profile command "translation-profile incoming Change3476" to the inbound dial-peer from CUCM.
>> you can test the translation rule as below
Router#test voice translation-rule 1 3476
Please rate all the helpful posts