10-07-2008 06:39 AM - edited 03-15-2019 01:46 PM
Lets say I have 3 T1 PRI coming in from the PSTN, not an nfas group. I want to route all outbound calls to the PSTN. How do I group the 3 PRIs into 1 logical link?
10-07-2008 06:53 AM
In CM, you use the RouteGroup/RouteList for outbound calls
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42dialpl.html#wp1043613
In CME, you use the "preference" commands on your Dial-Peers for outbound calls
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/dialplan.html
10-07-2008 06:57 AM
Im not using call manager at all. These PRIs are on a 3825, the call comes in SIP g711 matches an incoming peer then needs to go out any available channel on any of the PRIs, can I group the PRIs into a trunkgroup somehow, and have just the 1 dial-peer route out that trunk?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide