Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I like to prevent users from randomly downloading large stuff off the internet. I am thinking just limit host access port from 1GB to 100mbps on my campus 3750 and 3850 stack access switches?
If so, any sample configs. Anyways, I have
policy-map ...
Hi
Got a 2 qty 3850 on 3.6.5e ipservices. Can I run dhcp split scope. For example, 1st 3850 has DHCP network 172.18.12.0/22 but should just hand out 12.0/22 and 13.0/22 while the other 3850 hand out 14.0/22 and 15.0/22.
Thanks
Hi
Got a 3850 on 3.6.5e ipservices and when I configure both hsrp and pbr on a vlan interface, the hsrp stays but pbr never appears. On other vlan interface without hsrp, the pbr configs remains.
Am I on wrong code or is hsrp/pbr on vlan interfac...
Hi
I setup a 4 stack 3850 running 03.06.05E and hard set priority 15 on the 1st one. As I add each 3850, I would come up as a member and then I would manually set priority respectively as 13 and 11. On the 4th member, it joined as priority 1 default...
HiLooking for some design ideas. I have 2 ISP but want symmetrical routing via primary ISP to take advantage of 100mbps WAN. I have a /29 from both ISP so R1 will EBGP with Primary and Backup. R2 will do the same - EBGP with Primary and Backup. R1 an...
Per bug ID: CSCts43507 dated May 2, 2016
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCts43507/?referring_site=bugquickviewredir
It saids "ACE Module should be hardened" but the "workaround: none"
I search and cannot find a hardening doc for th...
I found 2 resource so just go down a bit for vlan-base QoS on this guide
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Network_Virtualization/PathIsol.html#wp81660
and
http://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos...
haha...I haven't logged into cco for so many years that I was surprise to see this update. I don't even do voip anymore....Nice my post has helped you 11 years later....makes me feel olllllddddddd!!!
arghh...even though the QoS is explictly applied to the subinterface gig 0/0.12, it is implicitly applied to the main gig 0/0 so instead of G0/0 having 1000mbps, the traffic is shaped down to 1.5Mbps - There is no QoS applied to the main interfaceSi...
