Provider for SP Trunk Lab Tests

[csedlmeier]

Dear colleagues.

Most of the time I was dealing with ISDN connections from provider to our company. But now we have an location in Sweden where we connect a SIP Trunk to Telia. My idea is now to setup a lab router to prepare myshelf for a SIP Trunk configuration.

Did some one already configure a SIP Trunk to Telia or did some one know a provider where I can connect with my test configuration ?

Any idea ?

Kind regards

Christian

[Vivek Batra]

Hi,

SIP trunking configuration for most of the providers remain same except credentials you got from your provider. However please note that if you make SIP trunk work with one provider doesn't mean that it will work with other as well. You may need to take care of ANI, header customization etc depends on provider requirement.

Just google 'free SIP providers' and you will get plenty of free providers you can test SIP trunk with.

- Vivek

[csedlmeier]

OK thnaks for answer. I found some free provider and I found the following example configuration:

https://supportforums.cisco.com/sites/default/files/legacy/9/9/4/43499-july-26-cube-randy-wu-presentation-regular-size-modified-randy.pdf

Did some one have some other examples of the configuration for SIP Trunk ?

[Vivek Batra]

Hi,

Please check the following page where you will get many reference documents.

http://www.cisco.com/c/en/us/solutions/enterprise/interoperability-portal/networking_solutions_products_genericcontent0900aecd805bd13d.html

- Vivek