1. I am working for a few different school districts as a phone-in-tech. They all have VoIP issues where calls will be dropped during when there is alot of network traffic. None of the switches have any QoS implemented on them. I am wondering what commands are needed to properly configure QoS through out the network.
But most importantly I am trying to understand what the commands mean.
I feel like I have a good grasp of the mls qos map cos-dscp command means. Im not too positive on what the numbers after it mean. I think I understand it as a ranking of some sort.
mls qos map cos-dscp 0 8 16 24 34 46 48 56
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 1 2 4
mls qos map cos-dscp 0 8 16 24 34 46 48 56
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 1 2 4
can someone explain to me the syntax happening in the mls qos srr-queue lines and what they mean?
I think it applies to the egress ports i just don't quite grasp what the threshold values mean.
Is there anyone that can shed some light on the situation? Thanks!
