03-05-2014 03:14 AM - edited 03-16-2019 10:01 PM
Hi
I have a cisco 891 router having c890-universalk9-mz.152-4.M4.bin IOS,
Show version
voice-gw#sh ver
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 17:06 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)
multinet-voice-gw uptime is 2 weeks, 6 days, 21 hours, 59 minutes
System returned to ROM by power-on
System image file is "flash:c890-universalk9-mz.152-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 891 (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.
Processor board ID FCZ173992T4
9 FastEthernet interfaces
1 Gigabit Ethernet interface
1 Serial interface
1 terminal line
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO891-K9 FCZ173992T4
License Information for 'c890'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Configuration register is 0x2102
i want to implement COR list but Dial-peer cor custom command is not working.
voice-gw(config)#dial-peer ?
data Data type
hunt Define the dial peer hunting choice
inbound Define the inbound options
no-match Define the disconnect cause for no dialpeer match
outbound Define the outbound options
search Define dial peer search service
terminator Define the address terminate character
voice Voice type
It doesnt show COR? what could be the reason?
thanks.
03-05-2014 04:13 AM
Global info about COR:
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/42720-configuring-cor.html
I think your router doesn't support this...
HTH,
Dragan
03-05-2014 04:19 AM
Thanks for your response. Is there any cisco document which says cisco 891 router doesnt support COR? I have checked IOS and it does support cor list commands.
03-05-2014 04:23 AM
The only best source - Cisco Feature navigator
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Check there to be sure 100%...
HTH,
Dragan
03-05-2014 04:28 AM
Show dial-peer cor command works on same router but doesnt work on configuration mode ..strange!
voice-gw#sh dial-peer cor
Class of Restriction
voice-gw#
03-07-2014 02:30 AM
Problem solved after changing IOS, there might be bug in previous IOS and is not mention any where in cisco docs. after copying latest version c890-universalk9-mz.154-1.T1.bin, dial-peer cor command works!
03-07-2014 02:43 AM
Great!
Good info...
HTH,
Dragan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide