"Location" Parameter Calculator

[ysanadiga01]

Hi there,

Is there any calculator available to determine the Audio Bandwidth for a location?

Thanks.

[Marwan ALshawi]

this is cisco bandwidth calculator for voice need registered useres

https://tools.cisco.com/Support/VBC/authc/forms/CDClogin.fcc?TYPE=33619969&REALMOID=06-000e3fb4-2d43-142b-95c5-83846dc90000&GUID=0&SMAUTHREASON=0&METHOD=GET&SMAGENTNAME=$SM$GDuJAbSsi7kExzQDRfPKUItt%2bPcjKOjTGlbtk%2fRp7BdNYLiP9lyOBjXBU5PAxIXD&TARGET=http%3A%2F%2Ftools.cisco.com%2FSupport%2FVBC%2Fjsp%2FCodec_Calc1.jsp

keep in mind the folowoing facts

each g711 call with location CAC in CCM need 80k while on IOS GK needs 128k

each g729 call with locations CAC in CCM needs 24k while with IOS GK needs 16k

good luck

if helpful Rate

[ysanadiga01]

Hi marwanshawi,

Thanks for your answer. I hope you can help me with this. If I have a 512 line, what should I choose in Audio Bandwidth field?

Thanks

[Marwan ALshawi · Accepted solution]

u mean u have two locations that mean u have created two regions right?

what codec do u use between reagions?

if u use g711 then

512/80 about 6 calls

if g729 about 21 call

but if u use g711 bwith the site and g721 between locations in this case u will need a trnascoder!

just put 512 in the audio bandwidth

good luck

if helpful Rate