Redirecting Trunk SIP problem

[acolmagro]

Hi,

I have a client with a CUCM 9.1 an Alcatel OXE R10.1. They are interconnect by trunk SIP. All the E1 "T2" access are on the Cisco.

He has a phone on the OXE that is redirected to a phone on the Cisco after 4 ringings. It's working when the call is from the E1 or the OXE but isn't working with the call from the Cisco. The call crash after the 4 ringings.

Can you help me ?

Thank's

Pierre

[Manish Prasad]

Enable the option "redirect by application" from the SIP profile applied to the CUCM sip trunk.

Thanks

Manish

[acolmagro]

Thanks