cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
406
Views
5
Helpful
2
Replies

registering a CCME in CCM 3.3

royalblues
Level 10
Level 10

I have CCME configured with extensions

I also have CCM 3.3 configured and i want to register the CCME on this CCM and want to make calls from the CCM extensions to the CCME extensions

How should i go about configuring it.

thanks

Narayan

2 Replies 2

gogasca
Level 10
Level 10

In CCM configure an InterCluster Trunk, non GK controlled and check MTP required box.

In CCME configure a voip dial-peer that point to CCM.

Disable inbound Fast Start in CCM 3.3

Here is more info:

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme33/cme33sa/cme33bsc.htm#wp1001000

Thanks for the link.

Is it possible to just have the CCME configured as a gateway for the extensions it is configured with and have a dial peer to point to that gateway.

Will this work.

network diagram attached

Narayan