Hi,
If the FAX calls are incoming on PRI straight to BRI then there is NO voip therefore FAX relay or passthrough are not involved
If the calls to fax are all to a dedicated called number then you should be able to capture these with dial peers.
Something like this:-
!
dial-peer voice 100 pots
description *** FOR INCOMING FAX CALL MATCHING 4321 ***
incoming called-number 4321
direct-inward-dial
port 0/0/0:15
!
!
dial-peer voice 201 pots
description *** FOR INCOMING FAX CALL MATCHING 4321 TO BRI ***
destination-pattern 4321
port 1/0/0
pref 1
!
!
dial-peer voice 202 pots
description *** FOR INCOMING FAX CALL MATCHING 4321 TO BRI ***
destination-pattern 4321
port 1/0/1
pref 2
!
Regards,
Alex.
Please rate useful posts.
Regards,
Alex.
Please rate useful posts.