12-16-2009 07:33 AM - edited 03-15-2019 08:48 PM
I'm getting 8 digits from the Telco and we use 7, I'm having a hard time finding out how to remove the first digit.
Example - incoming DID number 47111309 extension number 7111309
Thanks for the help
12-16-2009 07:47 AM
Hi,
Use a voice translation-rule/profile and applyy it to an inbound dial-peer that is catching the DID or directly to the port (although this will trim it to 7 digits even when you are not in SRST).
Something like this:
voice translation-rule 1
rule 1 /4711..../ /711..../
voice translation-profile indid
translate called 1
dial-peer voice 1000 pots
incoming called .
direct-inward-dialing
translation-profile in indid
HTH
Art
12-16-2009 07:52 AM
I have tried that but I'm getting an error
(cfg-translation-rule)#rule 1 /4711..../ /711..../
^
% Invalid input detected at '^' marker.
12-16-2009 07:56 AM
Duh!
Sorry I'm rusty..
Try
rule 1 /4711\(....\)/ /711\1/
Art
12-16-2009 08:18 AM
Worked perfect, thanks
12-16-2009 08:25 AM
np - glad to hear it helped
Cheers!
Art
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide