cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1314
Views
0
Helpful
0
Replies

Rightfax 9.4.1 sr140 VMWare working configuration

srogers
Level 1
Level 1

Rightfax 9.4.1 (172.27.65.211)

Cisco Unified CM 7.1.3 (172.17.210.1)

Cisco 2650xm Router (172.17.210.253)

VMWare ESXi, 4.1.0

Inbound Fax (fax machine) --> (2650 gateway) --> (cucm) --> (faxserver)

Analog fax hits the 2650 gateway which forwards to cucm as mgcp, the cucm route pattern forwards it to faxserver as h.323

Outbound Fax (faxserver) --> (cucm) --> (gateway) --> (fax machine)

Faxserver sends an h.323 fax  to cucm which converts it to mgcp and  sends it to the 2650 gateway and on to the analog fax machine

1.  Working IOS for my 2650xm router is 12.4(25d) c2600-IPVOICEK9-M.  I had intermittent send/receive success and upgrading my ios fixed the issue

2. Router settings which may or may not be required

2650config1.jpg

2650config2.jpg

2650mgcp.jpg


3.  Call Manager Config

Route Pattern

routepattern1.jpgroutepattern2.jpg

H323 gate to faxserver

h323gate1.jpg

h323gate2.jpg

h323gate3.jpg

4.  Rightfax Config

rightfax1.jpg

sr140-1.jpg

sr140-2.jpg

sr140-3.jpg

sr140-4.jpg


mgcpgate.jpg

5.  Diagnostic Tools

Wireshark (success)

wiresharksuccess.jpg

Use fdtool 6.2 for troubleshooting

http://downloads.faxcore.com/Dialogic/Boston/fdtool/

0 Replies 0