Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,In my network there is an UC520 it works well but i have some issues :1-I configured MOH ,it works well when the call established between CIPC and IP phone and CIPC side starts the HOLD but when IP Phone push the Hold button there is no music o...
Hi guys, ran into a bit of an issue last night. I have a 2901 running CME supporting about 30 phones. I loaded up the new 15.2 ios version and rebooted the router. When it came back up everything was looking find until the phones begain to try and re...
I have a Cisco C2901 router running C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M6.It's licensed as below;Technology Package License Information for Module:'c2900'-----------------------------------------------------------------Technology ...
Hi,I am trying to upgrade CUCM 6.1.2 to CUCM 6.1.4. I am upgrading using a DVD. I have given for upgrading as per the cisco procedure. After giving upgrade the server shows 'downloading the file' and the downloading status is 'accessing the upgrade ...
Hi,we have on our networks ponctual voice quality degradation for our ToIP user; we have noticed some paquet lost between gateway and IP Phone, but still don't know where the packet are lost.In order to perform easily tests, I am looking for a tool a...
Hi All,A quick and simple (I hope) question. I am running CUCM 7.1(5) with no AD integration. The customer initially did not want to enforce password change for ccmuser web page after first login. Now it is a requirement. I have ticked "User must cha...
Hi,We've recently set up call recording using Dual Media Stream. In CUCM, a call recording profile is set up which consists of a SIP trunk to the call recording server. It all works fine.However the problem is that the system was intended to record...
Hi,We are currently running a Cisco 2901 CME with CUE. Right now, when someone calls the main line, the auto attendant picks up. We then have a series of prompts or the user can enter the extension. When the user enters the extension (3 digits), it w...
Hey folks, need some help in getting the secondary tone when dialing a number on Call Manager 7.1x. What usually happen is when dialing a number from my IP phone for example 9498351516. i get a secondary tone after the number 8. the calls goes thr...
HiCurrently I have a CM 7.1(3) with 500 users running on a MCS7816. We will upgrade it to CM 8.5 but running on a VM of a UCS-C210.Does anyone know how to do this upgrade this environment without having to configure everything from scratch?Thank youM...
I live in a place with frequent power outages. I don't mind losing the phone for few minutes, but the problem is that after SPA2102 reboots, the phone line is not working.After much investigation, it seems that it's happening because SPA2102 boots be...
Are the 6941, 6941, 6961 phones supported in any version of SRST using SIP? The documents at these links lead one to believe they are not.http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cusrst/requirements/guide/srs71spc.htmlhttp://www.cisco.co...
Have a new 7962G. Looking for the detailed instructions to convert it to SIP to use on a 3rd Party Sip server.Can't seem to find a set of instructions....
Hi,My customer has requested to have the first two buttons of a 7971 as line buttons then have some speeddials, then have more line buttons. I can't seem to get the speeddials configured in amongst the line buttons - they appear after the line button...
Hi all, Somebody knows if are there a prevision to support locale in 9951 and CME? I have downloading the lastest locale file (CME_8.8_Locale) but the 9951 is still not present.The phone try to download the file Spanish_Spain/lk-sip.jarRegards.
