Hello Guys,
I need to know the configuration to operate two site (FAI and customer) in rnis communication.
I have just received the number phone from the FAI.
The configuration that I have is next:
isdn switch-type basic-ni
dialer-list 1 protocol ip permit
interface bri0/0
(config-if)isdn spid1 number_received_from_FAI
(config-if)encapsulation ppp
(config-if)dialer-group 1
(config-if)dialer idle-timeout
(config-if)no shutdown
ip route 0.0.0.0/0 bri0/0
But I'm not sûr that it will be work.
Please someone can help me?
@Jaime Valencia and @Martin L thanks for the help
