Route List & Route Group

[adamgibs7]

Hello,

I have 2 location HO & Branch with call manager publisher 9.1 in HO and subscriber in branch. In HO users use E1 on VG to reach PSTN, I am planning to get E1 in Branch and I want branch users to go to PSTN by branch voice gateway, is it possible.??

[Jaime Valencia]

Yes, configure local route groups.

[adamgibs7]

Dear Jaime,

Can you elaborate more please,

I have 2 MGCP gateway HO and Branch, 4no's E1 ports of HO in  RG1 and 2 no's E1 ports of Branch in RG2,

In CUCM when I am creating a route pattern for example:9XXXXXXX and selecting RG1 then the call will flow from HO VG, how I shld make flow branch users from branch VG???

[Jaime Valencia]

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0100101.html

You may also read the SRND.

You can also just simply create another RP, and assign a RL with only branch GW.

[adamgibs7]

so you mean to say 2 same route pattern (overlapping)

9XXXXXXX with one RL of HO and another with Branch RL.

Thanks

[Jaime Valencia]

Yes, or use Local Route Groups and keep just one RP.

[adamgibs7]

thanks