Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I have a SIP trunk configured in VG to land incomming calls. Calls from outside are able to receive directly on DID extensions successfully. Want to configure the DID number to be forwarded to IVR so i can hear welcome greeting. like if someone ...
I uploaded my Music On Hold Audio Source. I restarted Media services. Then I went to one of my devices and select the audio stream needed for User Hold MOH Audio Source and Network Hold MOH Audio Source. I hear dead air.
I am working with a client and when they place calls out to any external user they have the wrong name showing on the external caller ID. I have spoken with the SIP provider and apparently they want us to pass the CNAM, or rather they have it setup f...
Hello,I am new to UCCX. I want to create script, when someone calls from outside to hear welcome playback and then the call must go to extention.For example: If someone dials 123456789 from outside they should hear welcome message and then the call m...
Hi Guys, When i have a current call, and conference to an external IVR number, DTMF's are not working for that. I assume that is the expected behaviour, but is there a way to make the conference bridge to regenerate these DTMF tones???Regards,
Good morning all,Having an issue with a CUCM 9.1.2 system. Pub/2Subs and whenever it gets to the second subs TFTP in DRF it fails with the error code: drf Result Code : 116-SFTP transfer failed during Backup. Either there is not enough disk space or...
Hi,there is a way to remove (only external) Calling Name Presentation from phone display? So, we need to show, on called phone display, only calling number ID and nothing else from external....I've tried to modify Calling Name Presentation from defau...
pls, after connecting your mcs 7800 series server through your concole to your pc, how do we get into the boot process?
Does the mobility feature in Call Manager allow for taking inbound call and forwarding to cell? Kind of like the EC500 in Avaya.
Share table comparison polycom hdx7000 vs cisco sx20 to me.
HI,I am trying to setup email notifications useing RTMT whenever CUCM goes down.I have enable DNS on both Publisher and subscriber.Added the email server IP to RTMT and added the recipients .When it did not work I added the SMTP to the Publisher (ema...
Hello all, I have a mix of IP Phone systems and slowly migrating to Cisco every where. If I have a system where I can change the DSCP marking to 46 can I just configure the switches as though it was all Cisco phones attached? Trying to avoid having...
Hi, I just installed a new CUE in my lab router. when I try to access it via IE6. it ask me the login name and password. So what's the default loging name and password with the new CUE?
Hello Guys, i have a question regarding certificates on cisco wired and wireless phones. I´m comming from the security/wireless side of cisco but i need an information about cisco call manager. We want to switch our network to eap-tls. We have a coup...
We recently upgraded our Call Managers to System version: 8.6.2.23900-10.We have a switchboard----Cisco Unified Attendant Console System Version: 8.6.2.11 (Administration Version: 8.6.2.163) Since our upgrade we have random but frequent problems wit...
| User | Count |
|---|---|
| 6 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
