01-16-2012 05:47 PM - edited 03-16-2019 09:02 AM
Hi Guys,
CME 9 with 9971. Can i have a shared line to an sccp phone?
thanks
01-16-2012 05:52 PM
Hello Aman,
Yes 9971 supports shared line
Take a look on this doc, Calling Features!
Rate this if helps you!
Regards!
01-16-2012 08:49 PM
sorry was more after the config. below is an example i took from another user on this forum.
voice register dn 1 -. Managers Phone
number 1234
call-forward b2bua busy 1000
call-forward b2bua mailbox 1000
call-forward b2bua noan 1000 timeout 18
shared-line
voice register pool 1
id mac x.x.x.x
type 8961
number 1 dn 1
cor incoming PSTN-INTL default
dtmf-relay rtp-nte sip-notify
username Manager password 1100
codec g711ulaw
voice register dn 2 -. Assistant Phone
number 1235
call-forward b2bua busy 1000
call-forward b2bua mailbox 1000
call-forward b2bua noan 1000 timeout 18
voice register pool 2
id mac x.x.x.x
type 8961
number 1 dn 2
number 2 dn 1
cor incoming PSTN-INTL default
dtmf-relay rtp-nte sip-notify
username Assistant password 1100
codec g711ulaw
I'm trying to create a shared extension between an manager and assistant. However, I'm only getting the assistant phone to ring while the manager phone does not show any incoming calls. is there a fix for this?
secondly, i need to add a sip phone as a secondary shared line to a sip phone. will it work and if yes would both phones ring at the same time as desired?
01-17-2012 08:23 PM
just needed to create fake voice register dns . all good
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide