02-26-2019 02:24 PM
Hi all, I want to modify codecs in the dspfarm profile, after shutdown the profile and try t modify the codec removing one of them I got this: profile oper state is down in progress, please wait for some time and retry
I try to no shut the profile but got this: profile oper state is down in progress, please enable after some time
how much time take this to end the shutdown?
sh dspfarm profile 2
Profile ID = 2, Service = TRANSCODING, Resource ID = 1
Profile Description : AVMBJ_XCODE
Profile Service Mode : Non Secure
Is there somethign I can do to faster this?
Profile Admin State : DOWN
Profile Operation State : DOWN IN PROGRESS
Application : SCCP Status : NOT ASSOCIATED
Resource Provider : FLEX_DSPRM Status : DOWN_PENDING
Total Number of Resources Configured : 11
Total Number of Resources Available : 11
Total Number of Resources Out of Service : 0
Total Number of Resources Active : 0
Codec Configuration: num_of_codecs:7
Codec : g722-64, Maximum Packetization Period : 30
Codec : g729br8, Maximum Packetization Period : 60
Codec : g729r8, Maximum Packetization Period : 60
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
I need to removed and add codecs and then torn on this profile, any advice?
thanks
Solved! Go to Solution.
02-26-2019 07:16 PM
02-26-2019 02:49 PM
The resources might still being used.
Or it could be a bug :/ - https://bst.cloudapps.cisco.com/bugsearch/bug/CSCue41195
Rolando A. Valenzuela.
02-26-2019 07:16 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide