02-17-2021 10:03 PM - edited 02-17-2021 10:06 PM
Hi, All
I have topology collaboration using CUCM and CUBE.
Endpoint - CUCM - CUBE - PSTN.
I tried to calls PSTN number, but i have error 501 not implemented.
Have you see problem sip error 501 not implemented? and how to solve it?
Please help, i attached my debug ccsip message on router. https://pendk.in/TrOg
Solved! Go to Solution.
02-18-2021 01:54 AM
Hi, All
So today i ready solve my issue , the problem is my CUBE need early-offer to send to provider. and after i add early-offer in my CUBE the calls is going normal.
Configuration document for early-offer force,
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-do-eo.html
Thanks all
02-17-2021 10:14 PM
Advice you to post the debug output in a file directly on the forum instead of on G drive where you would need to request access.
02-17-2021 10:50 PM
Hi, Roger.
Sorry for that. please check in here:
https://drive.google.com/file/d/1lsU3wnB8VPO-Kunwl7xusPrIBC9h8-oA/view?usp=sharing
and i also upload in forum
02-18-2021 01:54 AM
Hi, All
So today i ready solve my issue , the problem is my CUBE need early-offer to send to provider. and after i add early-offer in my CUBE the calls is going normal.
Configuration document for early-offer force,
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-do-eo.html
Thanks all
02-18-2021 02:53 AM
Glad you managed to solve it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: